Sccm uefi downloading nbp file

 · There should be two separated symptom you have. Scenario 1. screen flashes quickly when download NBP file in the UEFI PXE progress. --the right behavior of this step should be "download NBP file successful" message (WDS Boot Manager)solid displayed and waiting for user to press enter key to continue the progress.  · The PXE-enabled DP sends a DHCPACK that contains the BootFileName location and the WDS network boot program (NBP). Downloading the boot files. After the DHCP conversation completes, the client will start the TFTP session with a read request: The server responds with the tsize and then the blksize. The client will then transfer the file from the server.  · Optiplex Optiplex - Both configured as UEFI, NIC w/PXE enabled. 1 w/ Secure Boot, 1 w/o to test. UEFI Network Stack' enabled under System Configuration Integrated NIC. The 'Enabled w/PXE' radial is selected. Not using SCCM. In this setup DHCP is running on the WDS server, but in production there's a seperate DHCP server.

Thanks for you replied. I will check my client PC if enable secure boot, and I'd like to know my client PC is Intel CPU and my iPXE server is Raspberry Pi which installed Centos 8, I tried build bltadwin.ru from another Intel CPU architecture Centos server and ARM64 but both bltadwin.ru files didn't work as well. In my own testing PXE booting a Windows 10 VM to WDS/MDT is simply broken with EFI firmware. You have to use BIOS firmware unfortunatly. I found out the hard way after building a client image on a Win10 VM with EFI firmware, which I had to trash and rebuild as I couldn't PXE boot it to perform a WDS capture. 0 Kudos. With the release of SCCM Current branch , one of the interesting new feature is the ability to do a BIOS to UEFI conversion in a task sequence. This would also allow to use Secure Boot with Windows 10 for strengthen security.. In this blog, we'll explain how to convert BIOS to UEFI with a task sequence on HP computers.

1. This answer is not useful. Show activity on this post. pxeboot.n12 is a BIOS NBP. bltadwin.ru is a BIOS NBP. bltadwin.ru is a UEFI NBP. but. LiteTouchPE_xwim is not an NBP; the PXE firmware will fail trying to directly boot a wim file and it would go back trying to boot again the booting sequence could be i.e. pxeboot.nbltadwin.ru Optiplex Optiplex - Both configured as UEFI, NIC w/PXE enabled. 1 w/ Secure Boot, 1 w/o to test. UEFI Network Stack' enabled under System Configuration Integrated NIC. The 'Enabled w/PXE' radial is selected. Not using SCCM. In this setup DHCP is running on the WDS server, but in production there's a seperate DHCP server. Using a VM and UEFI PXE, I get past the point of loading the x64 boot image, and then it errors out with 0xc and a reference to \Windows\System32\bltadwin.ru My DHCP policies are set up as in the video above - I h, and 67 set for a UEFI x64 policy and a BIOS policy. The DHCP server and SCCM site server are the same server.